Finest Hand Crafted Cotton Shirts
Work Model
Word Glossary
Contact Us

JD Corp


 Count is unit to measure the thickness of Cotton or Cotton blended Thread (Yarn). Shirt quality is always measured by its yarn count. Count refer to the length of yarn derived from 1lb of cotton - higher the yarn count, finer the fabric.

Reed (EPI)

This indicates the number of the threads per inch in length side of fabric.

Pick (PPI)

This is indicates the number of threads per inches in width side of fabric. Higher the number of Reed and Pick makes the fabric more dense and compact

When two threads spin together to make a single thread before weaving the fabric. For example 2 ply 80 means 2 thread of 80's count are spun together to make a single thread

Blended Fabric

When two different raw materials are mix together to make a thread (Yarn) is called blended fabric, e.g. PC means Polyester and Cotton, PV – Poly viscose.

Tear Strength

This parameter determines the value of the strength of the fabric after the processing and finishing. Different   fabric   treatments reduce and increase the strength of the fabric. It is important to know tear strength of the finished fabric to determine its potential life. e.g., to make a fabric wrinkle free, it is often baked into resin. This treatment directly impacts the strength of the fabric adversely thus, one may find a good wrinkle free nature but the processing may have adversely affected the strength of fabric [due to use of an improperly higher amount of resin]. So, while high degree of wrinkle freeness may be desired, a wrinkle free treatment should not be done at high level at cost of the life of fabric.

Tensile Strength

This is tensile parameter to measure tensile strength as tear one.


CIH Whiteness

This is indicator for the whiteness in the fabric. Higher the number more is the brilliancy of the whiteness. If the CIH is 100, it indicates perfect whiteness in the fabric. We provide CIH whiteness up to 140, resulting in to an extra ordinary whiteness.

This is Durable Press Rating which indicates the wrinkle free nature of the fabric. Higher the DPR rate, more the wrinkle free nature of the fabrics. Desirable rate is +2.7.

Crease Recovery Angel indicates the nature of fabrics to recover the crease.

Seam Slippage

This parameter shows the strength of the garment on the seam joints. If these parameters are not maintained at fabric finishing level, it is quite possible that the fabric may not perform well at the seam joints once the garment is stitched.

Shrinkage %

This indicated that the fabric will shrink at certain percentage after finish   or    better   said    the   garment   will shrink during normal home/laundry wash. Normal parameters are 1 to -3.0%. If shrink percentage exceeds this limit, the garment will  loose  its shape in a few laundry washes.


This section is given to just provide in-depth information of fabric and associated issues with pure intention to make buyer familiar with this various fabric terms.

We consider most of these values for the garment, with  the  objective   of   providing  our buyer  a  trouble free future for  our   relationship and the product.  We  provide  utmost   transparency, more  than what most other  manufactures will not provide for their products, as  we  care  for  our  product  and our business relationship with our buyers.

Definition given are to the best of our efforts the sole purpose  being  to  provide  primary and necessary  information to the   garment  buyer in good faith.  Although this  has given  without any prejudice,  buyer  cannot   treat  these  as  sole   guiding   parameters .  It   is  our  intent to present   only   accurate   information.   However,  in the event any information  contained  herein is erroneous, JD Corp of India accepts no liability or  responsibility.




  Powered & Managed by JD Inc. All Rights Reserved by J D Corporation